Contact Us
About Great Leather
Online Shop
Great leather news
Leather Care Specialists - Repair and Restore
How it works
Prices
Helpful Info
Testimonies
Photo Galleries
Great Leather's Blog

Great Leather Blog

News and information related to Great Leather leathergoods and it's customers, as well comments and photos related to leather care, repairs, and restorations.

The Difference in Leather Jackets

Dena Hamilton - Tuesday, October 08, 2013

HOW TO CHOOSE A LEATHER COAT

The leather itself is, of course, the biggest factor.  Most of what is on the market today in smooth leather is lamb or cowhide and these are almost always your best choices. Pigskin is not common in smooth leather, as it is usually tanned for suede which we don't recommend. (Click here for or more on suede.) Deer, elk, and moose are commonly made into garments, but not usually found in the stores, and are difficult to keep clean. Only occasionally will you find new garments made of goat.  Most of these will likely will have a sprayed dye finish*. 

Lambskin is beautiful, soft as butter, and feels like a second skin on you!  There is nothing like a lamb jacket!  However, lambskin can be delicate.  Know that the least expensive of lamb coats may tear easily and the finish wear off quickly. Even so, if you find a lamb jacket you want for the style, fit, or feel - then buy it!  Take it home and spray it with Aquila , or other water repellent for leather, and purchase some Tenderly to apply when it's time, and keep it moist. This will help keep it clean and looking nice. When the color begins to fade, since lamb is almost always vat dyed, it can be redyed by Leather CARE Specialists and made to look new again. 

Cowhide is much tougher and the finish lasts longer. If you don't want to be concerned about jumping in the car or truck, being careful with the seat belt, or shoving your gloves in your pockets, you should buy a cowhide.  New tanning processes are delivering some “lambtan” cowhides that are very close to the feel of lamb.  If you prefer the luxury of lamb but need the practicality of cowhide you should consider these.  Labels will still only say “100% Leather.”  Ask your clerk to be sure of what you are buying. Keep a cowhide coat conditioned properly and you should have it to enjoy for a great many years. 

Next, look for vat dyed leather as opposed to sprayed finish leather.

*Sprayed Dye Finish
Sprayed finish hides have not been dyed in vats during the tanning process, which allows for color penetration all the way through the skins. An example of sprayed cowhide jackets are your brightly colored sports leather jackets. Your less expensive casual coats may also have a sprayed finish. You can know a sprayed finish by checking the garment at the stitching needle holes, or at corner edges (collar tips, for example, where the leather has been pulled  to turn). If the “paint” has been added after the tanning process there will be places where the finish cracks and you will see light colored flesh showing through.

Sprayed finishes are usually less desirable as they indicate extremely mass produced imports of questionable value, whereas a vat dyed jacket will allow new dye to penetrate and the jacket can be made to look new again in the right hands. 

(An exception to the rule - some USA made WWII jacket replicas on the market  that are made of expertly tanned and sprayed leather.)

Check the leather panels. Does the leather  have some body to it, a good moist look, and do the panels show consistency in cutting from the best sections of the hide?  Take a fold and see if it feels smooth when you move it back and forth between your fingers. Check for quality skin (see the photos below) Very thin places should give themselves away. Also, skivers can leave hairline cuts that go almost though. You can usually spot these from the outside.

Check the panels at the pockets, elbows, and stress points for strength. If they seem thin or stretchy, look for a different jacket.  The upper outside arms are one of the most common areas that we receive at Leather CARE Specialists for repairs.  This area is susceptible to tears, so make sure these panels feel strong without weak spots (see photos).

The underside of a quality skin.
The underside of a poor quality skin. 
The flesh is very thin in spots and will give way to any small stress.  This is an animal that was treated poorly, handled roughly, and, if only for this reason, you shouldn't buy it.

Check the other materials and construction details.  If the thread is dull, it is probably all cotton. You should be looking for bonded nylon to hold your coat together. Cotton wears wherever it rubs and you will end up with seams where the top thread is completely gone. Also, look to see if the stitching is back-stitched at the seam ends, and tight (indicating correct tension on top and bottom threads).

Are the buttons sewn securely with no loose ends? Are the snaps secure?

Is the zipper sewn in properly?  A zipper that is set in too close to the stitch line (the zipper head drags or the head sticks) will result in faded worn edges. Also, if the zipper is not sewn in nice and flat, it will be problematic. It may split open, jam, or wear out quickly at the pin.

A quality lining will have a very tight weave and quilted linings should use “lock” stitches.

Lastly, the price. Most likely you'll pay extra for a good coat, but it will be well worth it, and now, you are equipped to pick one! 




  
Comments